304 316 Honed Pneumatic Silenn Nerjaveèi tib, Nerjaveèi tiyo asye
Espesifikasyon
| Gwosè | Espesifikasyon | |||||||
| ID | Tolerans | OD | Tolerans | Epesè | Roundness | Dwat | Andedan sifas fini | |
| φ6xφ7 | 6 | 0.04/0 | 7 | ±0.05 | 0.5 | 0.03 | 1.5mm/m | Ra≤0.4μm |
| φ8xφ9 | 8 | 0.04/0 | 9 | ±0.05 | 0.5 | 0.03 | 1.5mm/m | Ra≤0.4μm |
| φ10xφ11 | 10 | 0.04/0 | 11 | ±0.05 | 0.5 | 0.03 | 1.2mm/m | Ra≤0.4μm |
| φ10xφ11.25 | 10 | 0.04/0 | 11.25 | ±0.05 | 0.63 | 0.03 | 1.2mm/m | Ra≤0.4μm |
| φ10xφ11.8 | 10 | 0.07/0 | 11.8 | ± 0.1 | 0.9 | 0.03 | 1mm/m | Ra≤0.4μm |
| φ11.8xφ13.8 | 11.8 | 0.07/0 | 13.8 | ± 0.1 | 1 | 0.03 | 1mm/m | Ra≤0.4μm |
| φ12xφ13.4 | 12 | 0.05/0 | 13.4 | ±0.05 | 0.7 | 0.03 | 1.2mm/m | Ra≤0.4μm |
| φ14.3xφ16.3 | 14.3 | 0.07/0 | 16.3 | ± 0.1 | 1 | 0.03 | 1mm/m | Ra≤0.4μm |
| φ16xφ17.4 | 16 | 0.05/0 | 17.4 | ±0.05 | 0.7 | 0.03 | 1mm/m | Ra≤0.4μm |
| φ20xφ21.4 | 20 | 0.06/0 | 21.4 | ±0.05 | 0.7 | 0.04 | 1mm/m | Ra≤0.4μm |
| φ25xφ26.4 | 25 | 0.06/0 | 26.4 | ±0.05 | 0.7 | 0.04 | 1mm/m | Ra≤0.4μm |
| φ32xφ33.6 | 32 | 0.07/0 | 33.6 | ±0.05 | 0.8 | 0.05 | 1mm/m | Ra≤0.4μm |
| φ40xφ41.6 | 40 | 0.07/0 | 41.6 | ±0.05 | 0.8 | 0.05 | 1mm/m | Ra≤0.4μm |
| φ50xφ52 | 50 | 0.06/0 | 52 | ±0.07 | 1 | 0.05 | 1mm/m | Ra≤0.4μm |
| φ63xφ65 | 63 | 0.06/0 | 65 | ±0.07 | 1 | 0.05 | 1mm/m | Ra≤0.4μm |
| φ16xφ18 | 16 | 0.05/0 | 18 | ±0.05 | 1 | 0.03 | 1mm/m | Ra≤0.4μm |
| φ20xφ22.8 | 20 | 0.06/0 | 22.8 | ±0.05 | 1.4 | 0.04 | 1mm/m | Ra≤0.4μm |
| φ25xφ27.8 | 25 | 0.06/0 | 27.8 | ±0.05 | 1.4 | 0.04 | 1mm/m | Ra≤0.4μm |
| φ32xφ35 | 32 | 0.07/0 | 35 | ±0.05 | 1.5 | 0.05 | 1mm/m | Ra≤0.4μm |
| φ40xφ43 | 40 | 0.07/0 | 43 | ±0.05 | 1.5 | 0.05 | 1mm/m | Ra≤0.4μm |
Nerjaveèi asye tiyo se yon kre long asye wonn, ki se lajman ki itilize nan petwòl, chimik, medikal, manje, endistri limyè, machin ak instrumentation ak lòt tiyo transpò endistriyèl ak pati mekanik estriktirèl.Anplis de sa, lè koube ak fòs torsion yo se menm bagay la, pwa a se pi lejè, kidonk li se tou lajman ki itilize nan envantè de pati mekanik ak estrikti jeni.Li se tou souvan itilize kòm mèb ak istansil kwizin.
Nou gen 2 kalite tib Silenn Pneumatic asye pur, ki se klas 316L ak klas 304.
FAQ:
Q1: Ki diferans ki genyen pou klas 304 ak klas 316?
A:
| Klas | C max | Mn max | P max | S max | Si max | Cr | Ni | Mo |
| 304 | 0.08 | 2 | 0.04 | 0.03 | 0.075 | 18.00-20.00 | 8.00-11.00 | / |
| 316 | 0.8 | 2 | 0.04 | 0.03 | 0.075 | 16.00-18.00 | 11.00-14.00 |
Q2: Ki diferans ki genyen pou 304, 304L, 316, 316L?
A:
| Pwopriyete mekanik | |||||
| Klas | Itemper | Tensile Psi | Sede Psi | Long% | Rockwell dite |
| 304 | Rkwit | 85000-105000 | 35000-75000 | 20-55 | 80-95 |
| 304L | AnnealedI1/8 Difisil | 85000-105000 | 35000-75000 | 20-55 | 75-95 |
| 316 | Rkwit | 85000min | 35000min | 50min | 80min |
| 316L | Rkwit | 80000min | 30000min | 50min | 75min |
| Klas | C max | Mn max | P max | S max | Si max | Cr | Ni | Mo |
| 304 | 0.08 | 2 | 0.04 | 0.03 | 0.075 | 18.00-20.00 | 8.00-11.00 | / |
| 304L | 0.035 | 2 | 0.04 | 0.03 | 0.075 | 18.00-20.00 | 8.00-13.00 | / |
| 316 | 0.08 | 2 | 0.04 | 0.03 | 0.075 | 16.00-18.00 | 11.00-14.00 | 2.00-3.00 |
| 316L | 0.035 | 2 | 0.04 | 0.03 | 0.075 | 16.00-18.00 | 10.00-15.00 | 2.00-3.00 |
Q3: Ki silenn chanm konpwesyon lè ki bezwen fèt an asye pur pneumatik silenn tib
A: MA, DSNU Pneumatic silenn ak tib silenn asye pur.
Q4: Èske ou gen tout silenn chanm konpwesyon lè en fe?
A: Wi, nou genyen.Li se pwodwi Customized.Anjeneral, li se itilize pa apwopriye pou klas manje oswa itilizasyon medikal.Si kliyan gen ase kantite, nou akeyi yo voye nou ankèt.
Q5: Si nou bay lòd pou tib silenn pneumatik asye pur, baton piston sa a ak asye pur?
A: Wi, baton an Piston se ak 304 klas Nerjaveèi asye.
